You are in: Home :: Products :: Routers :: Access Routers :: ONE2540
You are in: Home :: Products :: Routers :: Access Routers :: ONE2540

ONE2540

  • Distributed control and forwarding planes for rich, concurrent services
  • Up to 1 Gbps symmetrical services with advanced, concurrent IPv4/IPv6 services
  • High scalability for thousands of users and remote locations
  • Carrier-grade hardware reliability (redundant, hot-swappable fans and power supplies, ECC RAM to protect data integrity)
Not available

High-Performance Architecture for Sophisticated Services

This state-of-the-art software architecture enables a linear performance increase with the addition of CPU cores, delivering ASIC-like performance and processing latencies.

A hardware accelerator identifies traffic flows and distributes associated packets to multiple CPU cores. Packets are processed in parallel in the new OneOS V6.0 distributed packet engine. Because packet processing is fully managed as software, the ONE2540 brings the inherent advantages of software (versus hardware) solutions, namely: rich, extensible services. Compute-intensive services such as application visibility and control can be run concurrently at Gbps speed thus greatly improving user experience.

Scalability in Number of Users and Services

The ONE2540 is intended for use in headquarters and data centres. As a result, it needs to support a large number of users and the termination of flows from many branches. For this reason, the ONE2540 is equipped with a large memory (8 GB of RAM). Many users imply many user flows and associated firewall / NAT / … sessions. Up to 500k sessions are supported to serve potentially tens of thousands of users. This large RAM enables to accommodate a large number of remote branches where many VPN, logical links or BGP prefixes must be handled.

Reliable Services

The ONE2540 hardware architecture and software eliminates points of failures and thus increases service availability to the standards expected in critical locations such as data centres. Redundant power supplies warranty continuous operations during outage of a power supply. Fans and power supplies are hot-swappable for service continuity during hardware maintenance. The Error Code Correction (ECC) RAM verifies and corrects data integrity. Such RAM is typically found in carrier-grade servers and now available in the ONE2540 platform. Service availability is enhanced because software is protected against data corruption.

The ONE2540 integrates in various network topologies to provide redundant network access. While multiple paths are available, the ONE2540 can share the load between WAN links so as to maximise the available network capacity. A combination of layer-2 and layer-3 Operation, Administration and Maintenance (OAM) protocols enables the ONE2540 to quickly detect network failures and trigger fail-over to available links.

Unified Management from Branch to Headquarters

The ONE2540 is an instrumental piece to build a complete corporate network with the OneAccess portfolio. The range of OneAccess Multi-Services Access Routers (MSAR) provides smart enterprise solutions from small branch offices to headquarters. All MSARs are managed through common, standardised protocols for a unified, one-stop-shop management solution.

General

  • Dual Gigabit Ethernet WAN uplinks
  • 8 Gigabit Ethernet LAN ports
  • Console and USB ports for management

WAN Interfaces

  • Fibre, Copper, configurable
  • SFP/UTP SFP slot for fiber modules: 1000BASE-X, 100BASE-X
  • UTP interface 10/100/1000 BASE-T with RJ-45 connector

LAN Interfaces

  • UTP interface 10/100/1000BASE-T with RJ-45 connector
  • Integrated 8 port Ethernet switch

Console port

  • RS232 - RJ-45 port
  • Ethernet 10/100BASE-T - RJ45 connector
  • Slave USB - Mini-B connector

OneOS

  • Version 6.0

Performance and Sizing

  • 1Gbps recommended WAN speed
  • 100 VRFs, 400.000 / 100.000 routes (IPv4 / IPv6)
  • 500.000 NAT, Firewall... sessions
  • 1000 logical interfaces
  • 1000 NAT rules 1000 Stateful Firewall rules
  • 2000 traffic policers, filters and classifiers
  • 4000 traffic filtering rules and classification rules

IP Addressing & Routing

  • IPv4 and IPv6
  • NAT/NAPT: static/dynamic NAT, NAPT, selective NAT, ALGs
  • DHCP client, server, relay
  • DNS client, proxy
  • Routing protocols: RIP v1/v2, OSPF v2, BGP v4
  • Multicast Routing: PIM-SM and IGMP v2/v3
  • Policy-Based Routing
  • VRRP, VRF
  • Load balancing

Quality of Service

  • IP Classification and priority (DiffServ)
  • Class-Based Queuing (CBQ), CB-WFQ
  • Low Latency Queuing, fragmentation and interleaving
  • Policing, shaping and remarking
  • RED, WRED

PPP

  • PPP over Ethernet (PPPoE)
  • Automatic IP address assignment
  • PAP/CHAP authentication

Security

  • Standard and extended access lists
  • Zone Based Firewall
  • Session monitoring and limiting
  • User authentication locally, via RADIUS and TACACS+

IP VPNs

  • IPsec, GRE
  • IPsec encryption: AES, DES, 3DES
  • IPsec AH and ESP hashing: SHA-1, SHA-2 and MD5
  • IKEv1 & IKEv2 with pre-shared keys & certificates
  • IPsec tunnel and transport modes
  • NAT traversal

Bridging and VLANs

  • Bridging & Integrated Routing and Bridging (IRB) n
  • VLAN tagging and un-tagging n
  • Multiple VLAN IDs per port n
  • 802.1p priority tagging, ToS/CoS and CoS/ToS mapping

Management

  • Industry standard Command Line Interface (CLI)
  • Telnet, SSH
  • SNMP V1/V2C/V3
  • Support of user privileges FTP/TFTP/HTPP/SFTP/SCP upload/download configuration and binaries
  • QoS measurement probe
  • Traceroute, ping
  • Global statistics screens, Event and trace buffering

Dimensions & Environmental

  • W x H x D: 440 x 44 x 240 mm; Weight: 4,5 kg
  • Operating temperature: 0 - 45C
  • Humidity: 10 - 90% non condensing
  • Rack mountable for 19” and ETSI racks
  • Hot swappable Fan tray
  • Acoustic level: maximum 27dB(A)

Power supply

  • 2 redundant hot swappable Power Supplies
  • AC & DC 60W Power Supplies
  • AC PSU: Voltage range: 90 - 264 VAC - 50/60 Hz
  • DC PSU: Voltage range: 39 - 60 VDC

Our service portfolio is tailored to each individual customer’s needs. We aim to offer complimentary services to our customers to help them deliver the service level agreements they are contracted to provide.

For more information, view our Service Portfolio

Quick enquiry

AftercareProduct SupportInstallationPricesProduct Manual
Yes