Home  |  News  |  Technical Info  |  Contact  |  Distributors  |  How to find us  |  Support    |    Search

Voiceband Modem Aster 5

Aster 5 Modem

The Aster 5 series uses the superior DSP technology to achieve data transfer rates (uncompressed) of up to 33.6 kbps on leased lines and PSTN dial-up circuits with automatic or user controlled (ie. By the network management system) fallback based on custom defined line quality thresholds. The modem is designed for both 2 and 4 wire analogue lines.

The Aster 5 can even further increase the user data rate by using powerful compression algorithms. Both the V.24bis and the MNP5 algorithm are supported. It provides not only regular asynchronous compression but also synchronous compression on HDLC frames as a unique standard feature. This gives higher throughput and faster response times when interconnecting Frame Relay, X.25, or SNA equipment.

For larger concentration sites, rack-mounted versions are available mounted in a standard 19” card nest and can offer densities of 30 modems per rack.

Features

  • V.21 - V.34+ 33,600 bps on standard switched telephone lines (PSTN) and 2/4 wire leased lines
  • Superior DSP technology for optimum line performance
  • Flash memory for a future-proof solution
  • Full duplex asynchronous and synchronous data compression
  • Advanced PSTN backup scenarios upon leased line failure
  • Hacker-proof PSTN security access control
  • Optional DES encryption
  • Multiple management facilities including line quality monitoring
  • Backwards compatible with the Aster 4 series
  • Desktop and dual card version – Mains or 48V versions

Aster 5 - Specifications

Line Interface
  • RJ12 2 wire/4 wire leased line
  • RJ12 PSTN
  • Screw connections for 2 wire LL+PSTN or 4 wire LL
  • LL output level –15… 0dBm
  • PSTN output level –15… -10dBm
  • Max input level LL –3dBm
  • Max input level PSTN –10dBm
  • Impedance 600ohm, resistive or complex
  • Echo canceller up to 1.3sec (2 satellite hops)
  • User Interface
    • LCD screen
    • Keyboard (up, down, left, right, esc, enter)
    • Easyconnect handheld terminal optional
    Control Port
    • Aux port for management
    • 9-pin Sub-D DCE, 9600 bps, 8+N
    Modulations
    • Data modulations: V.34, V.33, V.32bis, V.32, V.29(4w), V.23, V.22bis, V.22, V.21, Bell212A, Bell 103
    • PSTN interoperability: V.8, Auto-mode
    DTE Interface
    • V.24/V.28 DCE 25 pins Sub-D connector (on V.24 models)
    • RS-530 DCE interface available
    • DTE speeds for buffered mode: 0.3 – 128.0kbps
    • Flow control: CTS, CTS/RTS, Xon/Xoff
    • RTS/DCD simulated switch carrier operation according to V.13
    Automatic Dialer
    • Dialer protocol: Hayes AT set, V.25bis
    • Dial format: Asynchronous, HDLC, Bisync ASCII & EBCDIC, BSC ASCII & EBCDIC
    • Memory for 200 telephone numbers
    • Automatic PSTN dial-backup in case of leased-line failure
    Features
    • Flash upgradeable firmware and Digital Signal Processing software
    • Full control over remote modem with local keyboard and LCD
    • Password exchange and callback security on PSTN
    • Access passwords list
    • Analogue line parameter monitoring on LCD
    • Free local maintenance software (TMA) available
    • Free flash download program (TML) available
    • Optional model with 56 bit key DES data encryptionv
    • Customised interface signaling GPPIN, GPOUT
    • V.54 testloops: AL, RDL, DL and integrated 511 BER generator with error count
    Mechanical
    • Desktop: 45x220x215 mm (1kg)
    • Rack-mount (twin): 235x25x335 mm (1kg)
    Power
    • Desktop: 85-265 V ac 47-63 Hz 8W
    • Rack-mount: 5W