ML100 E1 Multi-Pair DSL
|
The Multi-pair 100E1 is a high-speed, symmetrical, point-to-point, fibre-quality transport system that allows service providers to leverage their existing copper infrastructure to gain immediate revenues through the delivery of multiple E1 services to more of their customers. The ML100E1 delivers the maximum rate and reach available utilizing the existing copper plant. It maximizes carrier service revenues and can be installed within minutes, without the need to trench for fibre. Fully hardened and OSMINE-compliant, ML 100E1 is available now to deliver carrier-class E1 services to SME customers.
Features and Benefits
- E1 Services (TDM, ATM & Frame Relay)
- Uses standards based G.SHDSL Modems with Multi Loop copper pairs
- Link comprised from 4 to 16 aggregated copper pairs
- Scaleable bandwidth up to 67Mbps
- Fibre quality and reliability
- Fully hardened, NEBS Level 3, OSMINE compliant and CE certified
- Loop reach up to 5.5km on 0.4mm Copper
- Error performance: typical 10 -12 BER or better
- Low delay and jitter
- Automatic line qualification and deployment
- Cross Talk Cancellation (CTC) optional
|
ML100 E1 - Specifications
| System Features |
- Bandwidth 2 to 67 Mbps
- BER 10 -10 guaranteed, typically 10 -12 or better
|
- Low delay typically <3ms end to end
- 2 to 16 copper pairs
|
|
| LAN Protocols |
- VLAN Tagging 802.1q
- Priorities (4 queues) 802.1p
|
- Dynamic Bridging 802.1, up to 4K MAC addresses
|
|
| Interfaces |
- No. of Interfaces: 4 E1 per shelf
|
- Connector Type 50-pin telco (rear)
|
|
| E1 |
- Line Rate 2.048 Mbps ± 50 ppm
- Line Code HDB3
- Line Impedance 120 ohms, nominal balanced 100 ohms, nominal unbalanced
|
- Framing Unframed
- Compliance G.703, G.823, G.826
|
|
| High Speed Link |
- No. of Lines Up to 16
- Spectral Compatibility ITU-T G.991.2, G.SHDSL.bis, ETSI TS 101 524
|
- Connector Type 50-pin telco (rear)
- Sealing Current Per G.991.2
- System Timing Network or internal
|
|
| Management Interfaces |
Ethernet Interface
- Electrical Interface 10BaseT
- Connector Type RJ45 (rear)
Craft Interface
- Electrical Interface EIA RS-232
- Connector Type DB9 (front)
|
External Modem Interface
- Electrical Interface EIA RS-232
- Connector Type DB9 (rear)
|
|
| Management |
|
- Via Serial, Telnet, or Modem Connection
|
|
| Monitoring |
- MetaASSIST
- Performance Statistics
|
|
|
| Physical |
- Rack Mounting 19", 23" or ETSI racks
Dimensions
- Height: 3.50" (2U) (88mm)
- Depth: 11.0" (280mm) DC
- 12.0" (305mm) AC
- Width: 17.4" (442mm)
|
Power
- AC: 90-264 V, 47-63 Hz, 85 Watts
- DC: -48/-60 V nominal, Dual A&B, 70 Watts
|
|
| Environmental |
- Operating Temperature : -40 ~ 65 deg C
- Storage Temperature : -40 ~ 70 deg C
|
- Humidity : Up to 95% non-cond.
|
|
| Regulatory Approval |
Safety
- EN 60950, IEC 60950 CE
- EMC and Safety Compliant
|
EMC
- ETSI EN 300 386
- ETSI ETS 300 132
|
|
|
