The Crocus
HDSL Repeater Module (code 162015) offers the equivalent of two
back-to-back Crocus HDSL modems. One Crocus HDSL Repeater Module
allows effectively to double the distance between two Crocus HDSL
modems. Two modules allow to triple the distance.
One Repeater module offers the functionality necessary to do the
regeneration of the two line-pairs found on the Crocus HDSL 2P F modem.
The module can be locally powered at 48Vdc, or can be powered from the
remote end. In the latter case the remote modem should be equipped with
the remote power source functionality.
-
Remotely
or locally powered
Uses 2
twisted copper pairs
Conform
with ETSI ETR 152
E1 2048
Kbit/s (2x1168 Kbit/s HDSL) 2B1Q Data Flow Transport
Low
power consumption
-
Selftest
Diagnostics
The modules
can be fitted into different housings, depending on the environment.
Following housings are available:
 |
Indoor housing for
one single CR HDSL 2P REPEATER module (code 162016) |
Outdoor housing
with protection against moisture, vibration and impact for up to two CR
HDSL 2P REPEATER modules (code 162017) |
 |
 |
Outdoor housing
with protection against moisture, vibration and impact for up to six CR
HDSL 2P REPEATER modules(code 162018) |
Technical
specifications
Line interface
- Modulation: 2B1Q, ETR
152Transmit level: 13.5 dBm
- Number of pairs per
unit: 2x 2 pairs (suited for 1 Crocus HDSL F extension)
Characteristics
- Performance conform
ETSI ETR 152Jitter & Wander: conform G.823
- Surge immunity: ITU-T
K.20, K.21
Status Indications
- System and power
statusCentral side pair 1 statusCentral side pair 2 statusRemote side
pair 1 status
- Remote side pair 2
status
Power
- Consumption: max 4
WattsSupply: Local or Remote from transmission pairsSource: jumper
selectable: remote, central or local
- Voltage range: 40-120Vdc
Physical
- Connector DIN41612 Male
16 pins only equipped with "A" row even pins
- Module size (HxWxD) 8
TE x 100mm x 176mm (connector included)
|
